欢迎访问康琦专塑 登录 免费注册 交易热线:0769-23161362 交易时间(工作日):9:00-17:30
LLDPE / 219ZJ / 我要购买 我要下载
规格用途
树脂物性

DESCRIPTION 

SABIC® LLDPE 219ZJ is a butene linear low density polyethylene resin produced using solution technology, typically used for general purpose applications. Films produced from this resin are tough with good puncture resistance, high tensile strength and good hottack properties. The resin contains slip or antiblock additive. SABIC® LLDPE 219ZJ is TNPP free. 

This product is not intended for and must not be used in any pharmaceutical/medical applications.


TYPICAL APPLICATIONS

Shipping sacks, ice bags, frozen food bags, stretch wrap film, produce bags, liners, carrier bags, garbage bags, agricultural films, laminated and coextruded films for meat wrap, frozen food and other food packaging, shrink film (for blending with LDPE), industrial consumer packaging, and high clarity film applications if blended with (10~20%) LDPE.


TYPICAL PROPERTY VALUES

 PROPERTIESTYPICAL  VALUESUNITSTEST  METHODS
 POLYMER PROPERTIES
 Melt Flow Rate
 at 190 °C and 2.16 kg2.0g/10 minASTM D1238
 OPTICAL PROPERTIES(1)
 Gloss
 Gloss (45°)50

-

ASTM D2457
 Haze(1) 13%ASTM D1003
 FILM PROPERTIES(1)
 Dart Impact Strength
 Dart Drop Impact144gASTM D1709
 Elmendorf Tear Strength(1)
 Tear Strength, MD220gASTM D1922
 Tear Strength, TD318gASTM D1922
 Puncture resistance5.1J/mSABIC method
 Tensile test film(1)
 2% secant modulus, MD150MPaASTM D882
 2% secant modulus, TD145MPaASTM D882
 Stress @ Yield, MD11.1MPaASTM D882
 Stress @ Yield, TD12.9MPaASTM D882
 Stress @ Break, MD29.5MPaASTM D882
 Stress @ Break, TD22MPaASTM D882
 Strain @ Break, MD950%ASTM D882
 Strain @ Break, TD1130%ASTM D882


(1) Fabrication Conditions are: Die Gap 70(1.8 mm), Melt Temperatire 206C, output: 55 kg/hr, Die Diameter: 203mm and Blow-up Ratio:2.5:1


PROCESSING CONDITIONS 

Typical processing conditions for 219ZJ are: Melt temperature: 195 - 215°C, Blow up ratio: 2.0 - 3.0


HEALTH, SAFETY AND FOOD CONTACT REGULATIONS 

Detailed information is provided in the relevant Material Safety Datasheet and or Standard Food Declaration, available on the Internet (www.SABIC.com). Additional specific information can be requested via your local Sales Office.”

DISCLAIMER: This product is not intended for and must not be used in any pharmaceutical/medical applications.


QUALITY

SABIC Europe is fully certified in accordance with the internationally accepted quality standard ISO 9001.

STORAGE AND HANDLING Polyethylene resin should be stored in a manner to prevent a direct exposure to sunlight and/or heat. The storage area should also be dry and preferably do not exceed 50°C. SABIC would not give warranty to bad storage conditions which may lead to quality deterioration such as color change, bad smell and inadequate product performance. It is advisable to process PE resin within 6 months after delivery.


ENVIRONMENT AND RECYCLING

The environmental aspects of any packaging material do not only imply waste issues but have to be considered in relation with the use of natural resources, the preservations of foodstuffs, etc. SABIC Europe considers polyethylene to be an environmentally efficient packaging material. Its low specific energy consumption and insignificant emissions to air and water designate polyethylene as the ecological alternative in comparison with the traditional packaging materials. Recycling of packaging materials is supported by SABIC Europe whenever ecological and social benefits are achieved and where a social infrastructure for selective collecting and sorting of packaging is fostered. Whenever 'thermal' recycling of packaging (i.e. incineration with energy recovery) is carried out, polyethylene -with its fairly simple molecular structure and low amount of additives- is considered to be a trouble-free fuel.


DISCLAIMER

Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale (available upon request) unless agreed otherwise in writing and signed on behalf of the seller. While the information contained herein is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each customer must determine the suitability of seller materials for the customer’s particular use through appropriate testing and analysis. No statement by seller concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.


【免责声明】
康琦专塑发布此信息目的在于方便用户查阅,对于所有的数据及建议等给用户带来的不确定因素和后果概不负责。因此,用户与使用者在使用此产品之前,应向生产商或采购商索取或确认数据的可靠性。
关于我们
关于我们
联系我们
联系我们
电话:0769-23161362
邮箱:Service@cy668.com Ben@cy668.com
地址:广东省东莞市东城街道狮环路
扫码关注

微信公众号

手机站

Copyright © 2024 www.cy668.com All Rights Reserved  广东康琦专塑科技有限公司 

粤ICP备20038932号 增值电信业务经营许可证:粤B2-20201580 粤公网安备44195102000111

微信公众号